Slab CO2 laser “RLS-500”

"RLS-500" can be used for fast cutting, drilling, scribing the dielectric materials such as: wood, plywood, plastics, leather, ceramic etc.; and for cutting and welding of thin metal sheets, and also for marking and engraving of the surfaces. "RLS-500" – RF-excited (81,36 MHz) slab laser, operating in sealed-off mode up to 5000 hours. There is a possibility to refill the laser gas.
The feature of "RLS-500" is supercompactness. Laser head, solid-state RF-generator and AC/DC three phase power supply are jointed in common housing.

Specification of laser "RLS-500"

Output power	500 W (guaranteed)
Average power range	5 – 550 W
Operation modes	CW and pulse repetitive
Frequency	10 Hz-10 kHz
Duty cycle	1-100 (%)
Wavelength	10.2-10.8 micron
Mode	TEM00 (90%)
Beam quality	M2≤1.2 (K≥0.8)
Beam diameter (at the level of 99% power)	20 ± 2 mm.
Beam divergence (at the level of 86% of total power)	1,3 mrad.
Polarization	Linear 99.5 %
Power stability (24 hours)	±5 %
Pointing stability	±0.2mrad
Technical requirements
Temperature of cooling water	20o,C
Flow rate	10 L/min.
Electric AC mains	3 х 380 VAC , 10 kVA
Dimensions L х W х H [mm] and weight (kilogram)
Laser head with RF and DC power supply	980 х 350 х 350 / 55kg.